EarthMachHubExcavators, loaders, concrete machinery, road machinery, and jobsite equipment for global industrial buyers.
Brand New Cat 426f2 Towable Backhoe Loader for Sale
Traffic Safety Facilities

Brand New Cat 426f2 Towable Backhoe Loader for Sale

This detail page turns one product record into a narrower sourcing decision with clearer category fit, adjacent routes and RFQ-ready context.

Quote on request

Brand | Applications and Buyer Notes

Brand is organized as a sourcing-ready Traffic Safety Facilities reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time q

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Road and Compaction MachineryBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
AWD Cylinder, One (1) Double Acting - Bo
65.0 mmBased on visible page data; confirm exact value in the RFQ.
AWD Cylinder, One (1) Double Acting - Ro
36.0 mmBased on visible page data; confirm exact value in the RFQ.
AWD Cylinder, One (1) Double Acting - St
120.0 mmBased on visible page data; confirm exact value in the RFQ.
Application
construction, steer, roadBased on visible page data; confirm exact value in the RFQ.
Bore
105.0 mmBased on visible page data; confirm exact value in the RFQ.
Bucket Dig Force
57.22 kNBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Product sourcing profile

CategoryTraffic Safety Facilities
Inquiry workflowPlatform RFQ workflow
AvailabilityInquiry required
Updated2026-05-05

Product introduction

Home Manufacturing & Processing Machinery Engineering & Construction Machinery Loader Brand New Cat 426f2 Towable Backhoe Loader for Sale US$25, ,000.00 1 Piece-led product discovery for buyers looking for road and compaction machinery options. The page is organized around specification review, application fit, and inquiry-ready comparison.When evaluating this product, buyers should confirm application fit, required performance range, installation environment, lead time, documentation, and whether the supplier can support OEM or project quotations. Current vertical focus: excavators, loaders, concrete machinery, road machinery, and jobsite equipment sourcing and rfq-ready export supply platform.constructionsteerroadmini

Selection and RFQ points

Review material fit, application context, alternatives and RFQ detail before comparing related product paths.

Material fit Oriemac Machinery & Equipment

Confirm material, size, finish, tolerance and processing needs before price comparison.

Application fit application, operating environment and usage frequency

Add the target application and operating context so related products can be compared correctly.

Alternative path Jobsite Equipment

Use nearby materials, equipment types or category pages when this record is close but not exact.

RFQ detail Quantity, destination, timing

Include quantity, destination, target delivery window, packaging and any technical constraints.

Key specifications

CategoryRoad and Compaction Machinery
Brand
Unitset
AWD Cylinder, One (1) Double Acting - Bore65.0 mm
AWD Cylinder, One (1) Double Acting - Rod Diameter36.0 mm
AWD Cylinder, One (1) Double Acting - Stroke120.0 mm
Applicationconstruction, steer, road
Bore105.0 mm
Bucket Dig Force57.22 kN
Bucket Rotation205°
Bucket Weight - Excluding Teeth and Forks428.0 kg
Capacity1.05 m³
CategoryRoad and Compaction Machinery
CertificationISO, CE
ConditionNew
Cooling System22.0 l
Counterweights - Base115.0 kg
Counterweights - Medium240.0 kg
CustomizationAvailable
Digging Depth88.0 mm
Digging Depth - 2440 mm Flat Bottom3743.0 mm
Digging Depth - 600 mm Flat Bottom4094.0 mm
Digging Depth - SAE Maximum4119.0 mm
Digging Depth, 600 mm Flat Bottom, Manufacturer's4670.0 mm
Digging Depth, Manufacturer's Maximum4709.0 mm
Displacement4.4 l
Dump Angle at Full Height46°
Dump Height at Maximum Angle2733.0 mm
Dump Reach at Maximum Angle900.0 mm
EmissionsEngine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards.
Engine Oil - With Filter8.8 l
Feature Highlightsdigital
Features (1)Heavy-duty rear axle with self adjusting inboard brakes, differential lock and final drives.
Features (2)AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. AWD can be engaged on the move, under load, in any gear, forward or reverse. AWD has outer final drives for easy maintenance.
Features (3)AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. Also features double-acting steering cylinder with 52° steering angle for increased maneuverability.
Features (4)Dual foot-operated boosted brake pedals can be interlocked for roading.
Features (5)Parking/secondary brakes are independent of the service brake system. Parking brake is mechanically applied through a hand lever located in the right side console.
Features (6)Meets ISO 3450:1996 requirements.
Flow Rate132.0 l/min
Front Axle (AWD)11.0 l
Front Axle (AWD) - Dynamic9177.0 kg
Front Axle (AWD) - Planetaries0.7 l
Front Axle (AWD) - Static22943.0 kg
Fuel Tank160.0 l
Grill to Bucket Cutting Edge, Carry Position1482.0 mm
Height - Top of Cab/Canopy2869.0 mm
Height - Top of Exhaust Stack2716.0 mm
Hydraulic System106.0 l
Hydraulic Tank40.0 l
Inside Cab80.0 dB(A)
Lift Breakout Force54.46 kN
Lift Capacity at Maximum Height3610.0 kg
Load and Unload ModeFront Discharge
Loading Height4031.0 mm
Loading Reach1477.0 mm
Matched Termsconstruction, steer, road, mini
Maximum Bucket Rollback at Ground Level38°
Maximum Grading Angle113°
Maximum Hinge Pin Height3447.0 mm
Maximum Operating Height4368.0 mm
Maximum Pump Capacity132.0 l/min
Maximum Torque - 1,400 rpm394.0 N
Minimum Counterweight Recommendations - Standard Stick: Loader B115.0 kg
ModelCat 3054C Mechanical Turbo
Model NO.426F2
Net Peak Power - 2,000 rpm - EEC 80/126965.0 kW
Net Peak Power - 2,000 rpm - ISO 924965.0 kW
Net Peak Power - 2,000 rpm - SAE J134965.0 kW
Net Power - 2,200 rpm - ISO 924966.0 kW
NoteTravel speeds of Two Wheel Drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires.
Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)No derating required up to 2286 m altitude. Auto derate protects hydraulic and transmission systems.
Operating Weight - Estimated7990.0 kg
Operating Weight - Maximum8760.0 kg
Operating Weight - Nominal7990.0 kg
Operating Weight - ROPS Capacity - Maximum8760.0 kg
OriginShandong, China
Outside Cab104.0 dB(A)
Overall Length - In Roading Position5726.0 mm
Overall Transportation Height - 4.3 m3757.0 mm
Overall Transportation Length5678.0 mm
Overall Width - Excluding Loader Bucket2346.0 mm
Power66.0 kw
Power - Net66.0 kW
Power Shuttle Transmission - Forward 1st5.5 km/h
Power Shuttle Transmission - Forward 2nd9.0 km/h
Power Shuttle Transmission - Forward 3rd20.7 km/h
Power Shuttle Transmission - Forward 4th40.0 km/h
Power Shuttle Transmission - Reverse 1st5.5 km/h
Power Shuttle Transmission - Reverse 2nd9.0 km/h
Power Shuttle Transmission - Reverse 3rd20.7 km/h
Power Shuttle Transmission - Reverse 4th40.0 km/h
Power SteeringHydrostatic
Pressure250.0 bar
Product TitleBrand New Cat 426f2 Towable Backhoe Loader for Sale
Pump TypeVariable Flow, Axial Piston
Rated Load1-3t
Rated Power (Standard) - 2,200 rpm - Gross - ISO 1439668.5 kW
Reach from Swing Pivot at Ground Line5609.0 mm
Rear Axle14.5 l
Rear Axle - Centerline to Front Grill2708.0 mm
Rear Axle - Dynamic7648.0 kg
Rear Axle - Planetaries1.5 l
Rear Axle - Static19120.0 kg
Specification8000* 2200* 3350mm
Stabilizer Overall Width2242.0 mm
Stick Dig Force35.29 kN
Stroke127.0 mm
Swing Arc180°
System Pressure - Backhoe250.0 bar
System Pressure - Loader250.0 bar
Temperature3054c
Tilt Breakout Force53.92 kN
Tipping Load - Breakout Point7012.0 kg
Torque Rise - 1,200 rpm - Net38%
TrademarkCAT
TransmissionHydraulic
Transmission - Power Shuttle - AWD15.0 l
Transport PackageNude Package
Turning Circle - AWD (inner wheel not braked) - Outside Front Wh8.18 m
Turning Circle - AWD (inner wheel not braked) - Outside Widest L10.97 m
TypeSmall Loader
US$25,000.00-50,000.001 Piece (MOQ)
Walking ModeWheeled
Wheelbase - AWD2200.0 mm
Width2262.0 mm

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Related keyword paths

Grouped by the product keyword that generated the related path.

SOURCING DECISION BRIEF

Brand New Cat 426f2 Towable Backhoe Loader for Sale sourcing decision brief

This detail page turns one product record into a narrower sourcing decision with clearer category fit, adjacent routes and RFQ-ready context.

Category
Road and Compaction Machinery
Price status
Quote on request
Inquiry model
Structured product RFQ with quantity, destination and technical requirements.
Availability
Confirm by inquiry
Sourcing lens
Product detail to shortlist decision
Primary compare
Category, Brand, Unit
Record focus
Brand New Cat 426f2 Towable Backhoe Loader For Sale
Category focus
Traffic Safety Facilities
Buyer checklist
  • Category fit: Confirm whether the product belongs to the right category and nearby application path before outreach.
  • Specification depth: Review the visible specifications and convert missing fields into a clearer RFQ requirement set.
  • Route expansion: Use adjacent category, solution and procurement routes before settling on one detail page.
How should buyers use this detail page?

Use the detail page as a product-fit checkpoint. Confirm category placement, visible specifications and adjacent sourcing paths before sending an RFQ.

What should buyers compare first?

Compare the visible specifications, category fit and the nearest application or solution routes before asking for supplier options.

EarthMachHub related sourcing paths

EarthMachHub procurement phrases

EarthMachHub project-fit checks

Application Confirm Application before comparing offers or moving the inquiry forward.
Country Confirm Country before comparing offers or moving the inquiry forward.
Capacity Confirm Capacity before comparing offers or moving the inquiry forward.
Material Confirm Material before comparing offers or moving the inquiry forward.
Application route Use Application to compare adjacent options instead of relying on one broad title match.
Country route Use Country to compare adjacent options instead of relying on one broad title match.

EarthMachHub related product samples

Procurement notes

If visible specifications are still thin, add model, material, interface, quantity, application fit, destination and target lead time before comparing quotes.

Next sourcing actions